A-0001 – Slim

Used for grinding around very tight area such as bolts and nuts – Great for grinding start/stop on base string and in small holes

A-0002 – Bow Cone

Used for grinding around tight areas and in corners. The slightly rounded file is great for non squared angle situations.  Also used to remove sharp edges and paint removal.

A-0003 – Straight Cone

Along with A-0002 Bow cone file our Straght cone is used for grinding around tight areas and in corners. The coned file is  better suited for squared angle situations.  Also used to remove sharp edges and paint removal.

A-0004 – Little Papa

Our Little papa is one of our most popular files and is used for removing sharpe edges and following crack lines. Great for grinding inside pipes and obtaining different angle degrees  on pipes and corners.

A-0005 – Round Boy

Great for grinding inside pipes and removing weld seams. Can be used for many rounding situations. Also can be used like the A-0004 Round boy for grinding angles on edges. A favorite of many of our clients.

A-0006 – Al-Ti-Char

As the name suggest this is a very unique file and has a special nano coating specially designed for use on Aluminum, Titanium, Chartek and Heavy Coatings.

A-0007 – Shorty

Used for removing sharpe edges in tight areas and following crack lines. Great for grinding inside pipes and things like 45 degree angles on pipes and corners. Also used for removing welds.

A-0008 – Big Papa

Our Big Papa is like our Little papa grown up and is one of our most popular files. It is used for removing sharpe edges and following crack lines. Great for grinding inside pipes and obtaining different angle degrees  on pipes and corners

A-0009B – Big BoyB

This is used to remove paint and steel from flat surfaces and pipes. There are ball barrings in the head of the file that make flat grinding smooth and precise. Primarly used with our A-0104 Angle Grinder with the Handle Adapter.

A-0009C – Big BoyC

This is used to remove paint and steel from flat surfaces and pipes. There are ball barrings in the head of the file that make flat grinding smooth and precise. Used with our Handle Adapter.

A-0010 – Rough Boy

This is used to remove paint and steel from flat surfaces and pipes on larger surface areas. There are ball barrings in the head of the file that make flat grinding smooth and precise A favorite of wrap companies. Used with our Rough boy Handle Adapter or Standard Handle Adapter.

A-0500 – Grinding Disk for Paint – GDP

This is used to remove paint and steel from flat surfaces and pipes on larger surface areas. Comparable to a flat disc and a must have. Great for deck edges with limited space.

A-0502 – Cutting Disc

The only hand held Ex cutting tool of its kind. Use to cut through pipes and remove welds. There are also many more uses. The cuts are straight and clean. Clean up is safe and easy because all the large, blunt fragments fall within a few centimeters. The average disc lifespan is 12 meters in length (8-12mm depth).

A-0503 – Weld Removal Disc

The only hand held Ex cutting tool of its kind. Use to remove welds. There are also many more uses. Clean up is safe and easy because all the large, blunt fragments fall within a few centimeters. The average disc lifespan is 12 meters in length (8-12mm depth).

A-0104 – Angle 2000 – 4

Technical data

  • Speed – 2000 rpm
  • Weight – 1700g
  • Air inlet – 1/4″ NPT
  • Length – 281mm
  • Max Air Cons. – 0,68 m3/min
  • Temperature Marking – T3

A-0105 – Angle 1000 – 5

This machine can be used as a cutting machine and a gridning machine and has different setups.

Technical data

  • Speed – 1000rpm
  • Weight – 2400g
  • Length – 377mm
  • Max Air Cons – 0,50 m3/min
  • Temperature Marking – T3/T4
  • Air inlet – 1/4″ NPT

A-0107 – Straight 3000

Technical data

  • Speed – 3000rpm
  • Weight – 894g
  • Lenght – 216mm
  • Max Air Cons. – 0,34 m3/min
  • Temperature Marking – T3
  • Air inlet – 1/4″ NPT

A-0108 – Angle 2000 – 8

Technical data

  • Speed – 2000rpm
  • weight – 842g
  • Lenght – 222
  • Max Air Cons. – 0,56 m3/min
  • Temperature Marking – T3
  • Air inlet – 1/4″ NPT

A-0207 – Allen key – 6mm

6mm Allen Key includet in several of  our solution

A-0062 – Cooling cap for straight grinder

Cooling cap that fits on to our Straight grinder. you can add extra cooling thru if required.

Regarding our EX certification you will not need ekstra cooling to use the grinding tools in an EX environment.

A-0065 – Covering for Fuji FCD10X52

Covering for grinding disk A-0500 ( GDP) fits on air tool A-0105

A-0068 – Drop safety device

The drop safety device is attached to our air tools and makes it possible to secure the tool when working in heights.

A-0060 – Handle

Some of our grinding files have ball bearings on the end. This handle fits on to the ball bearings for eksta suport while grinding.

Together with air engine A-0107 it is a must to use this handle or the A-0060Rough Boy Handle to prevent breakage of the angle head on the air engine.

A-0060RB – Handle for rough boy

A-0066D – Adapter Extension –

Adapter Extesion for exstendig the lenght of our rotation files. fits and all our rotating tools fra, A-0001 – A-0008
can be applied to both air tools A-0107 and A-0104

Technical data

  • Weight 200g
  • Length 100mm
  • Diameter 19mm

Adapter Extension

A-0061 – Handle for straight grinder

This Handle fits on to both Straight grinder A-0107 and angle grinder A-0104 air engines

A-0202 – Spanner – 16mm

6mm Spanner that fits to the Bras Adapter on our rotating files.

A-0203 – Spanner – 17mm

17mm spanner that fits on to the spindel of angle grinder A-0105

A-0085 – STA Grinding pelicase

SafetyTools special designed Pelicase with antistatic foam is designed for safe transportation of our grinding tools.

A-0206 – Chuck key

Special designed Key to tighten and to release our cutting disk from the Air tool

A-0073 – Cutting Guard

The cutting guard is attached to the Angle 1000 – 5 when in use with a cutting disc.

A-0074 – Weld Removal Guard

The Weld Removal Guard is attached to the air tool A-0105 “Angle 1000 – 5” when in use with a Weld Removal Disc.

A-0086 – STA Cutting and Weldseam Pelicase

SafetyTools special designed Pelicase with antistatic foam is designed for safe transportation of our cutting and weldseam solutions.

A-0071 – Armoured hose

The armored hose is a antistatic hose with grounding. It also has a water tube attached for water supply to the grinder.

banner produk