The Titan™ 218 structural repair system is comprised of a unique, bi-axial carbon fiber fabric, saturated with NRI”s proprietary epoxy system, Titan™-Staturant Epoxy.

The Titan™ 218 carbon fiber is oriented in the 0° / 90° directions with the 0° direction being the primary, continuous fibers. The development of this system was designed to conform to ACI440 standards for nonmetallic composite reinforcing solution of concrete.The Titan™-Staturant Epoxy system is a two-part, 100% solid epoxy system designed for use in a wide variety of environments possessing excellent chemical resistance and high temperature ratings.

Datasheet  SDS Sheets

InformationVideosCase Studies

Typical Applications

  • Structural reinforcement
  • Containment and shear reinforcement
  • Bridge column repair
  • Pile repair
  • Seismic retrofitting


  • Long working time even in hot environments
  • Properties retained even at high temperature use
  • Solvent free, no VOC”s
  • Applicable in damp and wet environments
  • High strength and light weight
  • Manufactured in ISO 9001 certified facility
  • Full factory engineering consultation and support, ensuring safe and successful repairs


300 sq. ft. surface area requires: (2) gallons of Titan-Primer Epoxy, (5) gallons of TitanSaturant, (1) 12” x 300’ roll (0.3m x 91m)


As detailed on individual product datasheets and determined by NRI engineering calculations

Mixing & Mix Ratio

As detailed on individual product datasheets

Pot Life

75 minutes @ 75˚F (24˚C), less at higher temperatures


  • Application temperature shall be a minimum of 50˚F (10˚C) and maximum of 280˚F (138˚C)
  • Relative humidity must be 85% or below
  • Pipe surface must be 5˚F (15˚C) above dew point

Related Products
The following products are system components of the Titan-118 system:

  • Titan-Primer Epoxy
  • Titan-Saturant
  • Titan-Top Coat (if required)


Titan-218 is an ICC-ES, AC-125, ACI 400.8-13 repair system. Consult NRI Engineering for specified use.

Surface Preparation

Surface preparation shall be in accordance with ACI 546R, ICRI No. 310.1R-2008 and ACI 562-13 detail methods for the repair and surface preparation of concrete.


Installation of the Titan-218 System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, material saturation, and installation of the system are to be in accordance with NRI’s Titan Installation Guide, latest revision. Quality control inspection during and after installation of the Titan system shall be performed per NRI’s Installation Validation Procedure: Quality Control Records, latest revision.

Cleanup and Safety

For proper information regarding the safe handling, storage, and disposal of chemical products, users shall refer to the most recent SDS, latest revision, containing physical, ecological, toxicological, and other safety-related data.

Shelf Life

Epoxy: 12 months
Fabric: 12 months

Storage Conditions

Store indoors in cool, dry, ventilated storage at temperatures below 95°F (35°C)
Epoxy: store in original, unopened containers
Fabric: store in original packaging away from moisture or any contaminants


Titan-Saturant: 1 gallon (3.8L) and 5 gallons (19L)
Titan-218 fabric: 12” x 300’ (0.3m x 91m) rolls
Typically ships in 12” x 12” x 18” boxes (305mm x 330mm x 1626mm)

banner produk