trans-wrap

Trans-Wrap™ is a bidirectional non-woven 100% carbon fiber composite, saturated with NRI’s proprietary epoxy system, Thermo-Poxy™. The Trans-Wrap carbon fiber is oriented in the 0° / 90° directions and is stitched resulting in outstanding tensile values in both directions. It has a high thickness per layer resulting in fewer layers needed for reinforcement and quicker applications.

The Thermo-Poxy™ Epoxy system is a two-part, 100% solid epoxy designed for use in a wide variety of environments possessing excellent chemical resistance and high temperature ratings.

Datasheet

Typical Applications

  • Pipeline Repair
  • Containment and shear reinforcement
  • Bridge column repair
  • Pile repair

Benefits

  • Long working time even in hot environments
  • High temperature rating with an ambient cured epoxy
  • Thick laminate for cost effective installation
  • Applicable in damp and wet environments
  • High strength and light weight
  • Manufactured in ISO 9001 certified facility
  • Full factory engineering calculations, consultation, and support ensuring safe and successful repairs

Mechanical Properties

Test Method Result
Tensile Strength ASTM D3039 Hoop: 130,000 psi (8,963.18 bar)
Axial: 130,000 psi (8,963.18 bar)
Elongation @ Break ASTM D3039 1.46%
Tensile Modulus ASTM D3039 7,144,000 psi (492,561.5 bar)
Laminate Thickness Per layer 0.035” (0.889 mm)
Hardness, Shore D @ 75°F (24°C) ASTM D2240 85

Syntho-Subsea™LV Primer Epoxy Mechanical Properties

Test Method Result
Tensile Strength ASTM D3039 6,000 psi (413.68 bar)
Compression Strength ASTM D695 7,380 psi (508.83 bar)
Flexural Strength ASTM D790 4,550 psi (313.71 bar)
Flexural Modulus ASTM D790 142,188 psi (9803.51 bar)
Lap Shear Strength ASTM D3163 1,782 psi (122.86 bar)
Abrasion Resistance CS17 wheels with 1,000 gram weights 34.0 mg/1,000 cycles

Physical Properties

Property Typical Test Value
VOCs None
Pot Life 75 Minutes at 75°F (24°C)
Working Time 45 Minutes at 75°F (24°C)
Gel Time Approx. 161 Minutes at 75°F (24°C)
Set Time 4 Hours at 75°F (24°C)
Resin Application Field mixed and saturated
Service Temperature -50° to 250°F (-45° to 121°C)
Shelf Life 12 Months with recommended storage conditions

[/vc_tabs]

banner produk