Trenton PVC outerwrap requires no specific surface preparation and can be applied in a wide variety of environmental conditions. It is simply spiral-wrapped, with an overlap, over the existing corrosion coating. No special tools required. 

Features
• Easy to apply
• No tools required
• Durable mechanical protection
• Good impact resistance
• Economical
• Compatible with multiple coatings

Application:
Pipeline coating applications that might be subjected to severe soil stress or mechanical impingement can benefit from the protection of an additional outerwrap. Trenton PVC outerwrap is a cost-effective solution that delivers additional mechanical protection for Trenton Wax-Tape® wraps.

Application Procedures:

• PVC outerwrap is applied directly to the Wax-Tape® anticorrosion wrap surface. Where the outerwrap extends past the Wax-Tape wrap to the pipe surface, ensure that the surface is clean and dry at the time of application.
• Apply adhesive/sticky face of Trenton PVC outerwrap to the surface to be covered and commence wrapping, using tension to ensure conformability and intimate adhesion.
• Overlaps should be a minimum of 1″ or greater as specified. End laps should be a minimum of 55% of tape width.

Packaging:
Trenton PVC outerwrap is available in:

• 10 mil thickness
• 2″ x 100′ (5 cm x 30.4 m) rolls (24 rolls/case)
• 4″ x 100′ (10 cm x 30.4 m) rolls (12 rolls/case)
• 6″ x 100′ (15 cm x 30.4 m) rolls (8 rolls/case)
• 20 mil thickness
• 2″ x 100′ (5 cm x 30.4 m) rolls (24 rolls/case)
• 4″ x 100′ (10 cm x 30.4 m) rolls (12 rolls/case)
• 6″ x 100′ (15 cm x 30.4 m) rolls (8 rolls/case)

• Wax-Tape® wraps
• Epoxy coatings
• FBE
• PE
• Other pipeline coatings