Description
Fill-Coat #2® is designed to be installed cold out of a 55 gallon drum for small quantity requirements. It remains in a firm gel consistency at ground temperatures commonly found in normal pipeline operations.

End Use
Fill-Coat #2 is used to fill the annular space between the pipeline casing and the carrier pipe. It displaces water that may be present and it prevents water from re-entering thereby mitigating any further corrosion.

Application Procedures
Fill-Coat #2 is shipped directly to the jobsite in 55 gallon drums and pumped (at temperatures above 55°F) by air driven mastic pump directly into the casing through one casing vent until it flows from the opposite vent. Fill-Coat #2 can be heated and pumped as a liquid if desired. A 10:1 ratio mastic pump with follower plate is available from Trenton on a rental basis.

Packaging
55 gallon drums

Packaging
Material is pumped directly into the casing from Trenton’s heated tankers.

Advantages
• Prevents galvanic and atmospheric corrosion within casings
• Has good “wetting” and adhesion characteristics
• Displaces and prevents re-entry of water in casings
• Corrects “water shorts”
• Protects casing from deterioration
• Reduces cathodic protection current drain Possibly corrects “metallic short”
• Satisfies DOT requirements for shorted casings
• Carrier pipe can be removed
• Inert and nonvolatile
• Relatively inexpensive
• Delivered and installed by heated tank trucks
• Extra material brought to jobsite
• Surplus material returned to our facilities at no extra charge
• Material installed through meters
• Experienced personnel to perform work
• Equipment available for small and large jobs
• Storage facilities to insure material availability