Description
Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps. The material is pumped into the annulus of the casing until the casing is full.

Fill-Coat #6® is a cold-installed/high temperature petroleum based casing filler compound that can be installed at ambient temperature as low as 50°F (10°C) with portable pumps. The product is used in bridge abutment casings, and it can be used in casings with elevated temperatures.

End Use
Fill-Coat #6 is used to fill the annulus of gas distribution bridge abutment casings. it prevents corrosion by filling the void in the casing annulus. In addition, new water is prevented from entering the gas-filled casing. Applications include aboveground cased pipe (like bridge abutment casings).

Application Procedures
Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps (1, 5, or 50 gallon capacity). The
material is pumped into the annulus of the casing until the casing is full. The casing ends can be sealed with Trenton Fill-Putty™, Trenton #2 Wax-Tape® or an epoxy filler once it is full.

Advantages
• Non-Melting
• Anti-Corrosive
• Water Resistant
• Dielectric
• Inert
• Non-Toxic
• Non-Flammable
• Pliable

Trenton
Fill-Putty™, Trenton #2 Wax-Tape® or an epoxy filler once it is full.

Packaging
55-gallon drums